CLEARCOM Freespeak II

Set interphonie HF 10 postes, fréq 1,9Ghz, 3 antennes actives, 1 splitter

Descriptions détaillées

FreeSpeak II
FreeSpeak II™ is the next generation distributed wireless solution that operates in multiple world-wide license-free frequency bands: 1.897-1.933GHz and 2.4GHz. This high performance wireless intercom system is designed for extensive communication in large-scale operations. Its ability to maintain a strong and continuous wireless connection across an expansive coverage area while providing crystal-clear digital audio makes FreeSpeak II the ideal wireless roaming solution for live event, broadcast, sport production, industrial, military and government applications.


FreeSpeak II-Base-II
The FSII-BASE-II is a base station for the wireless FreeSpeak II 1.9GHz and 2.4GHz active transceiver and beltpacks with four 2-wire analog partyline connections, four 4-wire audio connections and four digital displays with soft keys. The base station can operate a mix of up to 25 1.9GHz and/or 2.4 GHz beltpacks on a single system. The base station can be used in Main Station mode with Talk and Call soft keys or as a Headset Station for communication and monitoring from the panel.The base station's digital displays allow easy system configuration directly from the base station or through the browser-based Core Configuration Manager tool.

Key Features and Benefits:
  • Routing and configuration of up to 25 FSII beltpacks
  • Browser-based configuration tool
  • Four 2-wire ports with call signal, auto-nulling
  • Four 4-wire ports with call signal
  • One dry contact relays
  • Multi-mode user interface with monitoring, setup and main station modes with assignable soft keys
  • Dedicated front panel keys for remote mic kill, stage announce and all talk
  • Supports both 1.9GHz and 2.4GHz FSII beltpacks on a single base station
  • Matrix and partyline configurations support up to 12 channels and/or groups
Specifications
  • Base-to-Beltpack Frequency Response: 100Hz - 7.1kHz
  • No. of Beltpacks per Base Station: 25
  • No. of Transceiver/ Antennas Supported by Base: 10
  • No. of Active Transceiver Ports: 2, one port can remotely power up to 1 FSII splitter or 1 FSII transceiver
  • PC Programming Port: 2 LAN RJ45
  • Relay Port: DB15, supports 1 set of relays and 2 GPI
  • Partyline A ,B,C,D (each): XLR-3F, on/off termination switch, Clear-Com and RTS compatible
  • Partyline Power On/Off: A/B, C/D paired
  • Partyline Output Voltage: 26 - 28VDC, 850mA per pair (A/B or C/D)
  • Four-Wire/Matrix Connection: 4 RJ-45
  • Program Input: XLR-3F, transformer isolated, line-level input
  • Stage Announce Output: XLR-3M, transformer isolated, line-level output
  • Front Panel Headset: 4-pin male and 5-pin female options
  • Front Panel Displays: 4 OLED’s with encoders and assignable soft keys
  • Front Panel Indicators: Antenna Status, Beltpack Status
  • External Power Supply Connection: 12VDC
  • Base Station Programming/Editing: Push-to-enter rotary encoder


FreeSpeak II 1.9GHz Beltpack
The five-channel, full-duplex FreeSpeak II digital beltpack was uniquely designed for the rigorous demands
of large-scale operations and continuous communication use. Ergonomic form factor, intuitive operation, and a rugged housing make the beltpack ideal for extended use. This beltpack operates in the 1.88 - 1.93GHz frequency band.

BELTPACK FEATURES:
  • Up to five communication routes per beltpack, each with a 5 or 10 character label
  • Four programmable pushbuttons, two rotary encoders and a reply button
  • Menu driven display, which can be partially or completely restricted
  • Secure system – beltpacks are registered to a particular base station or Matrix
  • Internal antenna – no antenna breakage or damage
  • Long battery usage – typically 18 hours of continuous talk time
  • Two battery options – rechargeable Li-Ion cells or disposable Alkaline AA Batteries
  • Drop-in charging port with built-in USB battery and beltpack charging capability
  • Strong metallic beltclip and shoulder strap points
  • Over-the-air beltpack easy registration and regionalization
  • Real-time monitoring of battery per beltpack
  • “Listen Again” audio memory to replay last 15 seconds of audio
  • Technician’s flash light on rear
Technical Specifications
  • Audio Bandwidth: 200 Hz - 7.5KHz (G.722)
  • No. of Full-Duplex Audio Paths: Up to 5 with individual level control (2 pairs), 2 controls and a main volume
  • Mode of Operation: Full duplex on all routes
  • Level/Talk Controls: 4 pushbuttons, a reply button and 2 rotary controls
  • Enter / Answer-Back Button: 1
  • Frequency Spectrum: 1.88GHz – 1.93GHz DECT Cellular auto roaming technology
  • Range: Up to 1475ft (450m) in good radio frequency conditions, 800 feet typical
  • Battery: Li-Ion or 3 AA alkaline cells
  • Battery Charging: Drop-in charger (AC60) or local USB
  • Battery Life: 18+ hours with Li-ion; 6 hours with 3 x Alkaline AA cells
  • Headset Connector: 4-pin male, Clear-Com standard
  • Microphone Type: Electret and Dynamic, selectable in beltpack menu
  • Microphone Level and Headset Limiter: Selectable in beltpack menu
  • Headset Limiter: Selectable from beltpack menu
  • Environmental: IP-65 water and dust resistance; -67-degrees F to +158-degrees F (-55-degrees C to +70-degrees C)
*Japan: 8mW average
**Exact frequency range depends upon country, and is preset e.g. Transceiver for Japan: 1.893GHz-1.906GHz.


FreeSpeak II 1.9GHz Active Transceiver Antenna
1.89GHz-1.93GHz* Band Active Transceiver Antenna allows users to freely roam around a facility while staying connected to the base station. Each Active Antenna can create a coverage zone of up to 1,475 feet. One Active Antenna supports up to 5 beltpacks with the ability of adding more if roaming or more beltpack support is required. Up to 10 remote Active Antennas can be strategically placed to cover a wide area. Each active transceiver antenna is IP65 rated for water and dust resistance and has a mount for microphone stands, allowing use and placement in virtually any environment. Unique to the FreeSpeak II system, both 1.9GHz and 2.4GHz beltpacks and active transceiver antennas can co-operate on the same system, increasing both the quantity of users as well as the cell roaming area.

ANTENNA FEATURES:
  • Up to 10 Active Antennas can be connected to one system
  • Up to 1,475 ft of coverage area per antenna
  • 1.9GHz and 2.4GHz antennas can co-operate on the same system
  • IP65 rated for water and dust resistance
  • Microphone stand mounting
* exact frequency range depends upon country where approved
Specifications
  • Frequency Spectrum: 1.88-1.93MHz for EU and US Cellular auto roaming technology
  • Modulation: GFSK, TDMA frame 10ms Full and Long slot
  • Output power (EU): 18-22dBm, (US): 18-20dBm
  • Operating: 32º-125ºF (0º-50ºC) Storage: 32º-150ºF (0º-70ºC)
  • Humidity: Between 20% and 90%, Non-Condensing


FreeSpeak II Splitter
The FSII-SPL is an antenna splitter that connects multiple FreeSpeak II transciever antennas to an Eclipse-HX matrix (via an E-QUE-HX frame card) or to a FreeSpeak II base station. The splitter provides up to 5 antenna feeds from one antenna port. An SFP fiber slot allows a fiber link between a FSII-BASE-II base station and splitter (base-to-splitter) or it can be used as a fiber bridge on legacy FreeSpeak II base stations and Eclipse HX matrix frames (splitter-to-splitter).

Key Features:
  • Provides up to 5 FSII transceiver antenna feeds on one antenna port on a FSII-BASE-II base station or E-QUE-HX frame card
  • SFP fiber slot for fiber link to FSII-BASE-II or as a fiber bridge between FSII-BASE-II stations and Eclipse HX frames
  • Supports both multi-mode and single-mode fiber
  • Configure settings using DIP switches
  • IP-63 water resistance for outdoor use
  • LED status indicator on front and back
  • Mic stand, rackmount or wall mount orientation (metric and imperial threads)
Connections
  • Transceiver Antenna: 5 Ethercon RJ-45, each with yellow LED indicators on front and back
  • Matrix: 1 Ethercon RJ-45, with yellow LED indicator on front and back
  • Fiber: 1 SFP port
Power
  • Splitter: Requires external power supply (included)
  • Transceiver Antenna: Provides power to antennas via RJ-45 connections
Environmental
  • IP-63 water resistance for outdoor use
  • +32°F to +122°F
  • (0°C to +50°C)

FreeSpeak II Antenna Splitter
The Antenna Splitter box provides 5 Antenna feeds from one antenna port on the FreeSpeak II base station or E-Que-HX card. Comes with PSU.

Technical Specifications
  • No. of Antennas: 5
  • No. of Splitters Per Base: 2
  • Connection Between Base and Splitter: CAT-5 or better cable with RJ-45
  • Connection Between Splitter and Antennas: CAT-5 or better cable with RJ-45
  • Powering of Splitter: Locally powered via supplied external power supply

AC60 Battery Charger
2-in-one, 5-way battery and beltpack charger for the FreeSpeak II system


BAT60 Battery
FreeSpeak II Lithium-Ion Battery for FreeSpeak II 1.9GHz and 2.4GHz beltpacks.

Ce matériel en situation